Skip to content

AUTO CASE SEALER WAT BYPASS

Auto Case Sealer WAT Bypass


PREVENTATIVE MAINTENANCE SERVICE DETAILS

  • Manual & Automatic Cycling Tests: Perform and verify proper operation of both manual and automatic cycling tests.
  • Drive Systems: Inspect rollers, belts, tension, bearings, cables, shafts, and rails.
  • Motors: Check and lubricate the drive chain and motor chain. Verify that motors are spinning at the same rate and adjust if needed.
  • Side Belt Shafts: Inspect the linear bearings for wear. Clean the acme shaft and make sure they are lubricated with dry PTFE.
  • Pneumatic Fittings: Inspect filters, hose/tubing, regulators, manifold.
  • Regulators: Set at the proper PSI. Check and drain the main regulator. Clean the vacuum generator.
  • Air Cylinders: Verify all air cylinders are free from damage. Check thatm connectors in the electrical box are seated properly. Verify all machine bed rollers can spin freely. Tighten any loose hardware. Check air connections for leaks and verify the air supply is clean, dry, and free from debris.
  • Controls: cameras, sensors, wiring.
  • HMI screen: Verify the function of each component. Confirm the peel-off arm is tensioned correctly.
  • Sensors: Verify all sensors are working properly, are clean and clear of debris, and ensure all sensor mounts are tightened securely.
  • Remote Assist: Connection is established and functioning as applicable.
  • Safety Systems Inspection: Ensure the doors, guards, sensors,and interlocks are all present, in good condition and function in accordance with the system design.
  • Tape Heads present in the machine (Top & Bottom or One only) will be serviced as part of the PM.

Tape Head Details – Click here for Taape Head WAT

Spare Heads onsite should use the Tape Heads PM Program for support on additional units.

PROGRAM SERVICE LEVEL VISIT FREQUENCY ADDED BENEFIT PM RATE MULTI-YEAR DISCOUNT PREVENTATIVE MAINTENANCE GENERAL SERVICES
TITANIUM Custom frequency of your choice Custom list price discount % on PM parts kits Custom multi-year program discount %
  • A technician will be pre-scheduled to arrive on-site and provide PM for operating equipment according to manufacturer recommended guidelines
  • All work is tracked by serial number
  • Mechanical & pneumatic components review
  • Operating health check up
  • Recommend replacement parts
  • Ongoing operator training for proper use of equipment
PLATINUM Monthly
(12 service visits per year)
10% off
list price discount on PM parts kits
5% – 2 years
8% – 3 years
GOLD Quarterly
(4 service visits per year)
10% off
list price discount on PM parts kits
5% – 2 years
8% – 3 years
SILVER Semi-Annual
(2 service visits per year)
7% off
list price discount on PM parts kits
5% – 2 years
8% – 3 years
BRONZE Annual
(1 service visit per year)
5% off
list price discount on PM parts kits
5% – 2 years
8% – 3 years